For highest demands. Powerful and flexible.

Bolt anchor FAZ II Plus

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps.

Product variants

Download of image data

Product variants

Approvals / Test reports

113 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Max. usable length hef,stand./hef,min.

Anchor length

Thread

Width across nut

Legend = Permission Available— = Permission not Available

More results

Viewed 18 of 113 variant (s)

Advantages

Quick and easier assembly without the need for drill hole cleaning (M8-M24).
Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.
The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.
The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage.

Applications

Steel constructions
Guard rails
Consoles
Tunnels
Lifts
Lifting platforms
Conveyor belts
Pumps
Ladders
Cable trays
Machines
Staircases
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Suitable for:

Concrete C12/15 - C80/95 (classification available)
Steel fiber concrete (classification available)
Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

Approvals

ETA-19/0520
ETA-20/0897
DoP No. 0334
DoP No. 0337
3023222
ESR-2948
BZS D 23-607
EPD-Kiwa-EE-181454-EN
EPD-Kiwa-EE-181455-EN
EPD-Kiwa-EE-181456-EN

Functionality

The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
In case of seismic demands, the annular gap can be filled using the filling disc FFD.
For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength ≥ 50 N/mm² e.g.: FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

Mounting Strip 3 Picture

1 / 8

ETA Certification Document

pdf, ETA-19/0520

European Technical Assessment for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR - Mechanical fasteners for use in concrete

Created on 05/24/2023

DOP - Declaration of Performance

pdf, DoP No. 0334

Declaration of Performance for for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR (Mechanical anchor for use in concrete)

Created on 05/31/2023

ETA Certification Document

pdf, ETA-20/0897

European Technical Assessment for fischer Bolt Anchor FAZ II Plus dynamic - Post-installed fasteners in concrete under fatigue cyclic loading

Created on 05/22/2023

DOP - Declaration of Performance

pdf, DoP No. 0337

Declaration of Performance for for fischer Bolt Anchor FAZ II Plus dynamic (Post-installed fastening in cracked or uncracked concrete)

Created on 06/05/2023

System components

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	60 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Anchor length ( l )	65 mm
Thread ( ø x length )	M6 x 25 mm
Width across nut	10 mm
Installation torque ( T_inst )	8 Nm
Contents	—
Packaging	—
Amount	50 pcs.
GTIN (EAN-Code)	4048962461978

ETA-approval
ICC-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 30 mm
Anchor length ( l )	95 mm
Thread ( ø x length )	M10 x 53 mm
Width across nut	17 mm
Installation torque ( T_inst )	45 Nm
Contents	145 x FAZ II Plus 10/10 zp
Packaging	Bucket
Amount	145 pcs.
GTIN (EAN-Code)	4048962491302

ETA-approval
ICC-approval	—
Seismic-Approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Max. usable length hef,stand./hef,min. ( t_fix )	20 / - mm
Anchor length ( l )	75 mm
Thread ( ø x length )	M6 x 35 mm
Width across nut	10 mm
Installation torque ( T_inst )	8 Nm
Contents	—
Packaging	—
Amount	50 pcs.
GTIN (EAN-Code)	4048962461985

ETA-approval
ICC-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Max. usable length hef,stand./hef,min. ( t_fix )	20 / 40 mm
Anchor length ( l )	105 mm
Thread ( ø x length )	M10 x 63 mm
Width across nut	17 mm
Installation torque ( T_inst )	45 Nm
Contents	135 x FAZ II Plus 10/20
Packaging	Bucket
Amount	135 pcs.
GTIN (EAN-Code)	4048962491319

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Anchor length ( l )	75 mm
Thread ( ø x length )	M8 x 38 mm
Width across nut	13 mm
Installation torque ( T_inst )	20 Nm
Contents	—
Packaging	—
Amount	50 pcs.
GTIN (EAN-Code)	4048962461992

Bolt anchor FAZ II Plus

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download