The installation-friendly fixing with internal thread for non-cracked concrete.

Bolt anchor EXA-IG

The fischer bolt anchor EXA is a particularly installation-friendly steel anchor with an internal thread for anchorings in non-cracked concrete. The two expansion clips increase the expansion range and reduce the torque slippage. In the stainless steel design, the bolt anchor with internal thread is suitable for the anchoring of railings, cantilevers, and cable trays outside. Thanks to the internal thread, threaded rods and metric screws for fixture anchoring can be installed and removed with a low amount of effort.

Produktne variante

Download of image data

Produktne variante

(0) produktnih variant (s)

Drill diameter

Min. drill hole depth for pre-positioned installation

Min. bolt penetration

Max. bolt penetration

Packaging

Amount

Poglej (0) od (1) rezultat (s)

Functionality

The EXA is suitable for pre-positioned and push-through installation.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Drill diameter ( d₀ )	8 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	60 mm
Min. bolt penetration ( l_E,min )	6 mm
Max. bolt penetration ( l_E,max )	15 mm
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962115352

Drill diameter ( d₀ )	10 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	60 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	20 mm
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962115369

Drill diameter ( d₀ )	12 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	65 mm
Min. bolt penetration ( l_E,min )	10 mm
Max. bolt penetration ( l_E,max )	25 mm
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4048962115376

Drill diameter ( d₀ )	16 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	95 mm
Min. bolt penetration ( l_E,min )	12 mm
Max. bolt penetration ( l_E,max )	30 mm
Packaging	Folding box
Amount	25 pcs
GTIN (EAN-Code)	4048962115383

Drill diameter ( d₀ )	10 mm
Min. drill hole depth for pre-positioned installation ( h₁ )	60 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	20 mm
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4048962115406

Bolt anchor EXA-IG

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos