Art.-No. 565201

fischer ATK 102 L-edge profile, 6 m

Top Features
  • Vertical load transfer.
  • Optimited for façade corners with ATK 102.

The advantages / Product description

Vertical edge profile ATK 102.
Advantages
  • The vertical profiles allow multifunctional use for direct fixings, as a spacer substructure or as a base construction.
  • The geometry of the vertical profile enables optimised load transfer.
  • The combination of wall holder and vertical profile ensures optimum compensation of tolerances in the building substrate.
  • The various available geometries are specially adapted to the individual application.
  • The surfaces are available in uncoated or black.
The vertical profile is a component of the BWM ATK 102 subframe system. It is used for vertical load transfer of the façade systems and fixed to the wall holders with system rivets. To enable thermal expansion of the profile, a difference is made between slotted holes (sliding points) and fixed points during fastening. Together with the wall holders and their length, the geometry of the vertical profile determines the façade offset. This system can also compensate for tolerances of the building substrate. The vertical ATK 102 profiles are the basis for visible and concealed clamp solutions. The profiles are available in 6 m lengths as standard.
Properties
  • Aluminum (e. g. EN AW 6063, 6061)

Application and approval

Applications
  • As a vertical profile for subframe systems in ventilatedrainscreen facades
Approvals
  • DoP: BWM-LE-005
  • DoP: BWM-LE-006
  • DoP: BWM-LE-007
  • DoP: BWM-LE-008

Assembly instruction

Functionality
  • Vertical load transfer of the impacting loads and transfer to the wall holders
  • Compensation of structural tolerances together with the wall holders
Mounting Strip 1 Picture
1 / 4

Technical data

Length (
L
)
6.000 mm
System
Amount 1 pcs.
GTIN (EAN-Code) 4048962383164

Documents for download

  • ETAs and DoPs
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Created on 05/08/2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Created on 05/08/2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Created on 05/08/2024
Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)
Created on 05/08/2024
cd-green-58bb58464c-mbzdk