Art.-No. 544154

fischer Injection mortar FIS EM Plus 390 S

Top Features
  • FIS EM Plus with optimised formulation for improved load values in cracked and non-cracked concrete.
  • The ETA assessment guarantees a service life of 100 years, an external expert report even up to 120 years.
  • For rebar connections from diameter 8 to 40 mm.
  • Can be used with threaded rod FIS A or internal threaded anchor RG M I for temporary and removable fixing points.
  • FIS EM Plus is to be processed at temperatures down to -5°C.
  • More safety due to approvals for diamond drilled and water-filled drill holes as well as seismic applications of performance categories C1, C2.
  • The approval of the injection mortar for use in glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris) allows the realisation of high-performance and appealing wood-wood, wood-concrete and wood-steel connections.

The advantages / Product description

The powerful injection mortar for rebar connections and cracked concrete
Advantages
  • The ETA assessment guarantees a service life of 100 years. The expert report of IEA Stuttgart even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
  • The optimised formulation of the epoxy resin mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
  • The mortar can be used for rebar connections from diameter 8 to 40, including seismic applications.
  • With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.The mortar is approved for diamond drilled and water-filled drillholes as well as seismic applications and thus offers safety under extreme conditions.
  • For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5°C.
The fischer injection mortar FIS EM Plus 390 S is a high-quality epoxy resin mortar for maximum load-bearing capacity in cracked and non-cracked concrete. Alongside the injection mortar, the injection system consists of reinforcement steel, the approved components anchor rod FIS A and internal threaded anchor RG M I. The anchor rod FIS A can be set with variable anchorage depths. This enables the system to be ideally adjusted to the load to be supported. This optimises the use of materials. The epoxy resin mortar is suitable for fixings in indoor and outdoor areas such as shear connectors for concrete layers, high racks, or heavy-duty steel constructions. The approval of the injection mortar for use in glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris) allows the realisation of high-performance and appealing wood-wood, wood-concrete and wood-steel connections.
Youtube VideoYoutube VideoYoutube Video

Application and approval

Applications
  • Post-installed rebar connections
  • Jointers for concrete layers
  • Rim beam anchorings
  • Seismic applications
  • Anchorings in diamond-drilled or in waterfilled drill holes
  • Heavy steel constructions
  • Silo installations
  • Tall shelving
  • Sound barriers
  • Temporary or removable fixings (with internal threaded anchor RG M I)
  • Anchorings in sealing surfaces according to WRL (Water Ressources Law)
  • Glued anchorages in wood, see approval for gluing in wood
Building materials
Approved for anchorings in:
  • Concrete C20/25 to C50/60, cracked and non-cracked
  • Glued laminated or glued solid timber of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris)
Also suitable for:
  • Natural stone with dense structure
You can find detailed information on building materials in the registration document.
Approvals
  • ETA-23/0842
  • ETA-19/0657
  • ETA-22/0001
  • ETA-17/1056
  • ETA-17/0979
  • DoP No. 0341
  • DoP No. 0351
  • DoP No. 0367
  • ESR-1990
  • Z-74.8-199
  • Z-74.8-211
  • Z-9.1-914
  • Report No MRF 19 26082687/C
  • EPD-DBC-FIW-20230530-CBA1-EN

Assembly instruction

Functionality
  • The epoxy mortar FIS EM Plus combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
  • Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
  • The mortar is injected bubble-free from the drill hole base.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
  • The anchor is set manually by lightly rotating it until it reaches the drill hole base.
  • During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.
Mounting Strip 1 Picture
1 / 9
Mounting Strip 2 Picture
1 / 9
Mounting Strip 3 Picture
1 / 5
Mounting Strip 4 Picture
1 / 15
Mounting Strip 5 Picture
1 / 13
Mounting Strip 6 Picture
1 / 13
Mounting Strip 7 Picture
1 / 12

Technical data

DIBt-approval
ETA-approval
Language on label EN, FR, NL
Contents 1 x Cartridge 390 ml
2 x Static mixer FIS MR Plus
Packaging Cartridge
Amount 1 pcs.
GTIN (EAN-Code) 4048962312058

Documents for download

  • ETAs and DoPs
  • Approvals and Certificates
  • Sustainability
  • Safety data sheets
  • Technical documents
  • Sales materials
European Technical Assessment for fischer FIS EM Plus dynamic - Post-installed fasteners in concrete under fatigue cyclic loading
Created on 06/11/2024
European Technical Assessment for fischer injection system FIS EM Plus - Glued-in rods for timber connections
Created on 09/13/2024
European Technical Assessment for fischer injection system FIS EM Plus - Post-installed reinforcing bar (rebar) connections with improved bond-splitting behaviour
Created on 10/30/2024
Declaration of Performance for fischer injection system FIS EM Plus (Mortar for post-installed rebar connections)
Created on 08/07/2023
European Technical Assessment for Rebar connection with fischer injection system FIS EM Plus - Systems for post-installed rebar connections with mortar
Created on 11/01/2024
Declaration of Performance for fischer injection system FIS EM Plus (Mortar for post-installed rebar connections)
Created on 11/19/2024
European Technical Assessment for fischer injection system FIS EM PLUS - Bonded fasteners and bonded expansion fasteners for use in concrete (Alternative drilling methods, seismic and fire in steel fibre reinforced concrete, variable working life, time-to-failure assesment)
Created on 02/10/2025
Declaration of Performance for fischer injection system FIS EM PLUS (Bonded fastener for use in concrete)
Created on 05/06/2024
cd-blue-c6785f99-s8hkv