Art. nr. 539919

fischer Highbond anchor FHB II-A L Inject M12 x 120/25 R

Top Features
  • For high loads in cracked concrete.
  • Economical in serial installation.
  • Low drill hole depth means less drilling effort.
  • No drill hole cleaning when using a hollow drill with extraction.
  • Suitable for pre-positioned and push-through installation.

Productomschrijving

The economical solution in cracked concrete.
Advantages
  • The Highbond system FHB II Inject achieves high load values in cracked concrete.
  • The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
  • The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
  • When using hollow drills with extraction, no drill hole cleaning is required.
The Highbond anchor rod FHB II-AL R Inject is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AL Inject A4 for example guard rails and steel brackets are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Toepassing en goedkeuring

Applications
  • Bridge railings
  • Façades
  • Staircases
  • Steel constructions
  • Masts
Building materials
Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked
Also suitable for:
  • Concrete C12/15
De details (bouwmaterialen, belastingen, etc.) van de beschikbare goedkeuring zijn van toepassing.
Certificering
  • ETA-16/0637
  • DoP No. 0281
  • GS 3.2/16-352-1
  • (2103/12/12) - CM

Montage instructies

Functionality
  • The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
  • For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
  • The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
  • When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.
Mounting Strip 1 Picture
1 / 9
Mounting Strip 2 Picture
1 / 9

Technische gegevens

ETA-approval
Drill diameter (
d0
)
14 mm
Drill hole depth (
h0
)
126 mm
Anchorage depth (
hef
)
120 mm
Max. fixture thickness (
t fix
)
25 mm
Thread (
M
)
M12
Width across nut 19 mm
Amount 10 pcs.
GTIN (EAN-Code) 4048962272994

Documenten om te downloaden

  • ETAs and DoPs
  • Approvals and Certificates
  • Technical documents
European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete
Gecreëerd op 12/14/2017
Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)
Gecreëerd op 01/19/2021
cd-green-58bb58464c-tb9pl